Bosch Dishwasher Error Codes Easy Fix Procedure Guide

In this article we are talking here on a couple of the widest Bosch Dishwasher Error Codes found, we are back today to help our perusers out further by inspecting, and ideally additionally helping with, probably the most widely recognized Bosch dishwashers error codes that can be found.

As we specified already, yet it bears rehashing, the machines themselves are furnished with a discovery framework to report when it recognizes blames inside the machine itself, by showing the error code, or codes, for the blame on the machine’s advanced readout – more often than not where the timer confront appears.

Image result for Bosch dishwasher

The code itself generally appears as a mix of a letter (regularly E or F) trailed by two numbers. These codes ought to demonstrate what the issue is, and even where, it is radiating from. So the Bosch Dishwasher Error Codes themselves will let you know precisely where you should begin peering inside the machine to benefit it.

In this article, we will take a gander at four a greater amount of the most widely recognized Bosch Dishwasher Error Codes that may come to pass.

We will take a gander at Bosch Dishwasher Error Codes E15, E22, E01, E09, and we will take a gander at every one of these errors one by one, ideally giving you the direction to determine every one of these errors thusly.

Bosch Dishwasher Error Codes

Error E15:

Error code E15 implies, just, that there is no water in the dishwasher, or that the machine accepts there is no water in the machine.

Numerous sources propose that keeping in mind the end goal to determine the issue, you would require just to haul the machine out and tilt the dishwasher back by forty-five degrees incidentally while squeezing the machine’s capacity catch to clear the error. This will, without a doubt, clear the error briefly, and enable the dishwasher to keep running.

Although, in undeniable reality, this error implies that it is likely that the machine is encountering a little release, driving the water to gather in the base plate at the base of the machine. When this water has gathered, it triggers a Styrofoam drift in the base, which at that point activates a smaller scale switch, which at that point kills the water delta on the machine, setting off the E15 error code.

Tilting the machine back just tips a portion of the gathered water out of the machine, resetting the marker; this does not, truth be told, take care of the issue.

On the off chance that you need in excess of a transitory arrangement and keeping in mind the end goal to legitimately settle the E15 error code, take after these basic guidelines:

  • Turn off the dishwashing machine, and unplug the machine.
  • Open the dishwasher’s entryway, and unscrew the four screws holding the front of the entryway set up. At that point slide the entryway off.
  • Next, you should evacuate two more screws holding the front’s lower base plate set up, and pry the cover off. Do be cautious, however, as you will now have a few screws uncovered, which may effectively harm you.
  • Now, you should evacuate the protection behind the base plate. Completing this activity will uncover within the base of the machine.
  • In the focal point of the base, you will locate a square plastic cover that holds the microswitch itself. The switch itself has two blue wires turning out, helping you to recognize it.
  • You will now need to expel the plastic cover from the microswitch. To do as such, snoop the cover from the correct side, and the cover should fall off.
  • Behind the microswitch itself, there is a Styrofoam circle, whose size is around four inches thick. Evacuate the plate and tidy it up completely.
  • Replace the circle in its place, and reassemble the machine.

Also Read: Epson Error Code 0x97 Best Solutions !!

The machine should now work as typical, and the E15 error code should now vanish.

Error E22:

Error Code E22 means that there is lingering water staying in the dishwasher’s sump pump. Keeping in mind the end goal to determine the error, it is best that you check the pump for a blockage, and the machine’s channel as it might be grimy, especially on the off chance that it is working with a discernible measure of oil or another sort of develop.

Any of these will keep the machine from depleting appropriately.

To check the channels, take after the accompanying guidelines:

  • Turn the machine off before continuing to dismantle the machine.
  • Remove the base plate from the clothes washer.
  • Below it, you will locate the hexagonal channel, which ought to have a blue bolt at its front, demonstrating that the channel is bolted into put.
  • Twisting the channel will open it, enabling you to expel it from the base of the machine.
  • Next, you can expel the metal plate at the base of the machine, uncovering the external piece of the channel.
  • Next, clean the metal plate you have expelled from the base of the machine, alongside the two parts of the channel.
  • If the channels have turned out to be excessively built up with soil and grime, it is smarter to supplant them totally than to put them back in the machine. Substitution channels are effectively accessible on Amazon economically yet do ensure you have both the inward and external segment of the channel.
  • Now, once the channel is supplanted, click it over into put, and supplant the dishwasher’s lower rack.
  • The machine should now work effectively. On the off chance that despite everything it doesn’t, it might be that the pump itself has turned out to be blocked. To clear it, take after these guidelines:


  1. With the channels effectively expelled (as above), pry off the draw cover until the point when it clicks. Grasp the cover by the haul and force it upward until the point that it opposes, at that point pull it forward to expel it.
  2. You would now be able to get out the pump itself, and evacuate any flotsam and jetsam that might be blockage the pump and keeping it from depleting appropriately.
  3. Presently, you can supplant the direct cover, alongside the channel, and the dishwasher’s lower rack.

The lingering water should now deplete from the dishwasher’s sump pump, and the error code E22 should now be settled.

Error 01 or E1:

Error code 01 or E1 implies that your Bosch dishwasher is encountering an issue with the engine. In particular, this error connotes that you have to supplant the power module in light of the fact that the engine controller has either quit working or is breaking down.

Likewise, with the various errors that we are talking about in this article, you can undoubtedly settle error code 01 or E1 yourself.

So as to do as such, basically take after these means:

  • The primary thing you should do is to switch off control in the dishwasher.
  • At that point, precisely evacuate the toe kick board with a screwdriver.
  • When you have evacuated the board, you should separate the dishwasher and haul it out. The explanation for this is the area of the power modules. You may anticipate that the power models will be found directly behind the sash boards however you would not be right, as they are in actuality on the correct side base of the dishwasher.
  • What you should do then is to locate the base tabs holding the power module. There are two of them and they are made of plastic. Ensure that you pry the base tabs tenderly until the point when the power module has been cleared. When you have done that start moving the base of the power module keeping in mind the end goal to clear the base and draw the power module from the base.
  • The last advance expects you to pry the front of the base taps until the point that you open their cover. When you have opened the cover just detach all the wire saddles from the power module.

This should settle the error and your Bosch dishwasher should start to work accurately after that.

Error 09:

The last error is error code 09, That means there is a trouble disturbing the temperature.

This video should enable you to manage a defective warming component a famous fix on YouTube for this specific error.

All together words, in the event that you get this error on your Bosch dishwasher it would imply that there is a blame with the warming circuit because of overheating (this happens when the temperature ascends to more than 220° F.

In the event that you might want to settle this error, take after these straightforward advances:

  • Disengage the power string from your Bosch dishwasher or tip the circuit breaker.
  • Keep your Bosch dishwasher separated for, somewhere around, 5 minutes.
  • Interface your Bosch dishwasher once more.

As a rule, this is sufficient for the error code 09 to vanish and your Bosch dishwasher to work fine and dandy once more. Although quite possibly this won’t work Bosch Dishwasher Error Codes get back it doesn’t mean that you cant vanish Bosch Dishwasher Error Codes again, it implies that there is an issue with the control board that is situated inside the dishwasher entryway, particularly in the upper right-hand corner. If so you should supplant the control board.

As should be obvious, Bosch Dishwasher Error Codes E15, E22, E01, E09 are generally moderately simple to settle once you know the what causes them and take after the means we have spread out in this article deliberately.

Also Read: 9 Best Fixes For Error Code 6 Roblox Procedure Guide !!!


In the event that you have any extra guidance about Bosch Dishwasher Error Codes for clients who may have experienced any of these errors or some other criticism if you don’t mind make certain to leave us a message in the remarks segment beneath.

Add a Comment

Your email address will not be published. Required fields are marked *